Minigun Supergun Advanced Edition
$220.00 AUD inc. GST
The Minigun Supergun – ADVANCED edition by frank FJS including 4 player adaptor.
Features:
- 2 layer PCB – 110mm x 50mm | minimum 8mil trace width & clearance | 40 vias.
- Arcade PSU connection via Molex 6 pin Mini-Fit-Jr connector.
- COIN & SERVICE tactile switches.
- 2 x Neo-Geo style DB15 connectors for player 1 & 2 inputs. Follows Undamned pinout.
- Buttons 12345 on Jamma edge – Buttons 456 via kick harness connector. Buttons 4 & 5 may be toggled from the Jamma edge via a dipswitch.
- 8 Pin MINI DIN video and audio connector. Follows XRGB MINI / RGB MODDED NES / HAS pinout.
- 3.5mm audio output connector which disables audio output from the MINI DIN when utilised.
- Speaker to line level audio conversion – DC blocked – No Jamma audio pin is ever grounded.
- MONO or STEREO audio output. Selectable via a jumper.
- THS7374 based video circuit for RGB and SYNC signals. Buffered, attenuated and 75 Ohm impedance matched. Adjustable trimmer pots used to attenuate RGB levels. LPF may be enabled / disabled via a switch. Fixed resistor voltage divider used to attenuate SYNC.
- Power LED.
- Voltmeter to monitor +5V.
- OSSC safe.
Out of stock